Honda Golden Era Specialists.

Genuine Parts From Japan!

  • Free UK Shipping

    On orders over £100

  • OEM Parts

    Direct From Japan

  • Enthusiast Advice

    Since 2017

  • Easy Returns

    30 Day Returns

Celebrate Our New Site!

Order now with code

GOLDENERA
1 4
K-TUNED  |  SKU: KTD-BIL-AC5

K-TUNED HONDA ACCORD REPLACEMENT SHIFTER BASE PLATE

£166.65
VAT Included

Delivery and Shipping

Standard Shipping (UK):
Expect delivery in 2–3 working days. We may upgrade your order to Express at no extra charge depending on cart value, location, or items ordered.

Express Shipping (UK):
Sent via premium courier (DHL, UPS, Parcelforce, or FedEx). Most orders placed before 1PM (Mon–Fri) are dispatched the same day for next working day delivery (not guaranteed). Orders after 1PM are shipped next working day.

A working day is Monday–Friday, excluding UK public holidays.

Couriers may deliver on weekends at their discretion, but this is outside our standard policy.

Tracking details will be provided when your order ships.

Stock Information

Please check the stock status before ordering.

A green status means the item is in stock and has been recently verified.

If a product is out of stock or showing “contact us for ETA” just get in touch with us and we’ll give you an accurate restock estimate.

We aim to keep as many products in stock as possible, but due to low demand or special-order items, some products are only available to order in upon request.

Easy Returns

RHD Performance accept returns on new, unopened products within 30 days of the day you receive your order. To organise your return and get an RMA (Return Merchandise Authoriation) number, please contact us here.

This does not affect your statutory rights.

Fits: KTD-TSX-ACC - K-Tuned TSX/Accord Shifter ONLY (Does not fit OEM Accord or TSX Shifter) 

Note: This is only for those who have older style KTD-TSX-ACC (K-Tuned TSX/Accord Shifter) and want the upgraded base so they can mount it directly to the tunnel. 

Mounting Note: When mounting to the tunnel of an EF/EG/EK/DC2 you can tap/bend the lip where the old shifter used to pass through. This will be enough to mount the shifter directly to the tunnel. If you want to move it forward or back you will have to cut the lip off completely. All mounting hardware is included. You will have to drill 4 holes into the tunnel to mount it. 

The K-Tuned Billet Shifter Base Plate is designed to install older KTD-TSX-ACC (K-Tuned TSX/Accord Shifter) in EF/EG/EK/DC2. This is a replacement for older shifters which did not have the mounting locations on the plate. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems. 

The Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall. Note that we are assuming the heater core has been deleted on most race cars. We also want users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis. 

This shifter setup is gaining in popularity because it can be used on a K-Swap car with the newer 06-11 Civic SI trans (also referred to as the K20Z3 trans) or K24 TSX or Accord transmissions

Payment & Security

Payment methods

  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Built On Experience

Our parts catalogue is hand-picked for performance and reliability. They're the same products we use on our projects.

K-TUNED

K-TUNED HONDA ACCORD REPLACEMENT SHIFTER BASE PLATE

£166.65
Fits: KTD-TSX-ACC - K-Tuned TSX/Accord Shifter ONLY (Does not fit OEM Accord or TSX Shifter) 

Note: This is only for those who have older style KTD-TSX-ACC (K-Tuned TSX/Accord Shifter) and want the upgraded base so they can mount it directly to the tunnel. 

Mounting Note: When mounting to the tunnel of an EF/EG/EK/DC2 you can tap/bend the lip where the old shifter used to pass through. This will be enough to mount the shifter directly to the tunnel. If you want to move it forward or back you will have to cut the lip off completely. All mounting hardware is included. You will have to drill 4 holes into the tunnel to mount it. 

The K-Tuned Billet Shifter Base Plate is designed to install older KTD-TSX-ACC (K-Tuned TSX/Accord Shifter) in EF/EG/EK/DC2. This is a replacement for older shifters which did not have the mounting locations on the plate. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems. 

The Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall. Note that we are assuming the heater core has been deleted on most race cars. We also want users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis. 

This shifter setup is gaining in popularity because it can be used on a K-Swap car with the newer 06-11 Civic SI trans (also referred to as the K20Z3 trans) or K24 TSX or Accord transmissions
View product
Back to top